Measuring Cylinders (AVI-PW-661)

Polylab Measuring Cylinders, moulded in Polypropylene & TPX, are single piece cylinders. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad base provides good stability. Material: Polypropylene
Available in Capacity:
10 ml, 25ml, 50ml, 100ml, 250ml, 500ml, 1000ml, 2000ml

Measuring Cylinder Hexgonal (AVI-PW-662)

Polylab measuring cylinders are now available with hexagonal base also. The hexagonal base provides excellent stability to the cylinder where as the tapered spout works really well while pouring any reagent.
Material: Polypropylene
Available in Capacity:
10 ml, 25ml, 50ml, 100ml, 250ml, 500ml, 1000ml, 2000ml

Measuring Jugs (AVI-PW-663)

These handy Jugs, moulded in Polypropylene, are clear, autoclavable and have good chemical resistance. These jugs arc provided with a handle for easy & convenient lifting and have raised graduations for easy reading.
Material: Polypropylene
Available in Capacity:
250ml, 500ml, 1000ml, 2000ml

Conical Measures (AVI-PW-664)

These Conical Measures are very good for measuring small quantities of reagents. Moulded in Polypropylene, these autoclavable Measures have a hexagonal base which provides it excellent stability. The Measures are clear, have good chemical resistance and have raised graduations for easy visibility.
Material: Polypropylene
Available in Capacity:
12 ml, 25ml, 50ml, 125ml, 200ml

Seperatory Funnel (AVI-PW-665)

Polylab Seperatory Funnel is made of Polypropylene, giving it excellent contact clarity and strength. This pear shaped, autoclavable seperating funnel has a leakproof threaded screw cap. The Polypropylene stopcock, fitted with a self lubricating PTFE plug, is push fitted to the stem of the se’peratory funnel
Available in Capacity: 100ml, 250ml, 500ml

Spatula (AVI-PW-666)

Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge. This edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers.
Material: Polypropylene
Available in Capacity: 100ml, 200ml

Cell Scraper (AVI-PW-667)

This cell scraper, as the name suggests, provides an excellent option for cell scraping purposes in microbiology.
Material: Polystyrene
Available in Capacity: 240ml, 300ml

Stirrer (AVI-PW-668)

Made of polypropylene, these Stirrers are very useful for stirring different solutions in the laboratory. These Stirrers prove to be tough and long lasting.
Material: Polypropylene
Available in:
Ø-10 mm x h - 250 mm
Ø-7 mm x h - 200 mm
Ø-7 mm x h - 250 mm
Ø-7 mm x h - 300 mm

Policemen Stirring Rods (AVI-PW-669)

This, infact, is a multipurpose apparatus which works as a stirrer as well spatula. The fattened ends of this rod form two small spatulas.
Material : Polypropylene
Available in: Ø-6 mm x h - 245 mm

Soft Loop Sterile (AVI-PW-670)

This non-toxic disposable loop is accurate to semi quantitative stand for handling samples.
Material: Polystyrene
Available in:
Soft loopes - 1 u
Soft loopes - 10 ul
Inoculation Needle

Plantation Pots (AVI-PW-671)

Polylab Plantation Pots, moulded in polypropylene, are available in four different sizes. These pots have a downward extended rim which provide convenient lifting even if the pot is filled. The bottom of the pot is provided with holes for drain purpose.
Material: Polypropylene
Available in: 100 mm, 150 mm, 200 mm, 250 mm

Laboratory Tray (AVI-PW-672)

Needless to say, Polylab Laboratory Tray moulded in polypropylene is a multipurpose tray that can be used for sterilizing, drying glassware, porcelainware & other laboratory instruments. These steam autoclavable trays have tapered walls which prove good for nesting.
Material: Polypropylene
Available in:
450 x 350 x 75 mm
375 x 300 x 75 mm

Utility Tray (AVI-PW-673)

Adding to the already existing range of autoclavable laboratories trays, is the Utility Trays and as the name suggests this Polypropylene Tray can be utilized (“or purposes ranging from dry ing glass ware to sterilizing and to store any laboratory apparatus.
Material: Polypropylene
Available in: 375 x 350 x 130 mm

Carrier Tray (AVI-PW-674)

This autoclavable Polypropylene Tray has a unique feature i.e. its handle which proves really helpful in carrying reagents or laboratory apparatus from one place to another, single handedly.
Material: Polypropylene
Available in: 380 x 240 x 115 mm