Beakers (AVI-PW-601)

Polylab Beakers, moulded in Polypropylene, have excellent clarity and very good chemical resistance. These autoclavablc Beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout.
Available in 50 Ml, 100ml, 250 ml, 500 ml 1000 ml & 2000 ml

Burette (AVI-PW-602)

This Burette has a transparent acrylic body and a leakproof stopcock made fitted with a self lubricating PTFE plug. Each Burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids & bases except Hydrofloric Acid & Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used up to 5% wt/wt of acids or 30% bases.

Material: Polymethyl Methacrylate/TPX
Available in25ml, 50 Ml, 100ml

Pipette Pump (AVI-PW-603)

This pipette pump is fast release pipetting device for precise pipetting zip quick emptying. The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quii emptying. The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes. It resists acids & alkalies and can 1 easily disassembled for thorough cleaning.

Material: Acrylonitrile Butadiene Styrene
Available in: 2 m, 10 ml, 25 ml

Dropping Bottles (AVI-PW-604)

Blown in Low Density Polyethylene, Polylab Dropping Bottles dispense small uniform drops of liquids when pressed lightly.

Material: Low Density Polyethylene
Available in: 60 ml, 125 ml

Reagent Bottles (Narrow Mount) (AVI-PW-605)

These Narrow Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have excellent strength and are unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leakproof.

Material: Low Density Polyethylene & Polypropylene
Available in 60ml, 125ml, 250ml, 500ml, 1000ml

Reagent Bottles (Wide Mouth) (AVI-PW-606)

Same as above but in Wide Mouth.
Available in 60ml, 125ml, 250ml, 500ml, 1000ml

Narrow Mouth Bottle (AVI-PW-607)

This autoclavable bottle, made of polypropylene, can be used for storing & transfering chemicals and other reagents safe & sound.
Material: Polypropylene
Capacity: 4000ml

Wide Mouth Square Bottles (AVI-PW-608)

This autoclavable bottle, made of polypropylene, can be used for storing & shipping chemicals & reagents. Being wide mouthed, it is always convenient to pour in &i take out the reagents. The built in depressions on two sides provide excellent grip while holding this bottle.
Material: Polypropylene
Capacity: 4000ml